Mars Pro II epistar 80 LED grow light and Grow tent (EU)

259,90 EUR

Available on backorder



Mars Pro II epistar 80 LED grow light 150w (with switches) and Grow tent70x70x160cm (EU)

Mars Pro II Epistar 80 LED Grow Light with flexible U-connector to connect multiple lights together.Veg and bloom switches to control different growing modes. Upgraded power supply, fans and chips, provide you the highest built quality of Mars Hydro. With the creative reflector cup design to give out the perfect mixed spectrum lights, meet the needs of those who must have the absolute highest quality harvest possible.


Full Spectrum  Mars Pro II Epistar 80 led grow lights + Grow Tent  28″x28″x64″ 1680D kits  for all seeding, growth, and flowering stage

Item NO. Mars Pro II Epistar 80 and Grow Tent 28″x28″x64″ 1680D
Material Heavy Duty Nylon
Canvas Density 1680D
Connecter Material Steel
Ducting Port Quantity 3 ( 2×6”+1×8″ Double Cinching )
Electrical Port Quantity 2 (3”)
Vent Size 2 x 3″, 2 x 8″, 4 x 10″(Quantity*Diameter)
Ventilation System 1×8″ roof mount; 2×6″ upper side mount; 3×0.5 sq foot lower vents
Mesh Window Size 7”×12”(Quantity* L/W)
Door Quantity 1
Coverage Flowering: 2ft*2ft, Veg: 3.5ft*3.5ft
Max Yield 2.0g / watt
Compare to HPS/MH/HID 250w
Draw power 110V: Growth:81W±5%|Bloom:170W±5% / 220V:Growth79W±5%|Bloom:165W±5%
Hanging Distance Seeding: 24”-30“ Growth: 16”-24“ Bloom: 12″-16 “
Spectrum 440nm, 460nm, 630nm, 660nm,730nm, 2700k-3000k
Chip Brand Epistar
Voltage Input voltage: 85v – 265v Amperage: 3.18 @ 110v | 1.55 @ 220v
Amps 1.377A/110v / 0.699A/220v
Decibel Value 49.8DB
Plug Type EU,UK,AU,USA,Japan
View Angle of LED 100°
Humidity =<90%
Lifespan 50000 hours
Dimension 290*290*95mm
Work Temperature -4°F ~105°F (-20°C ~ 40°C)

USA, Canada, UK, Germany, Australia



Grow Tip

1.How do I determine the right light for my grow area?

Measure the floor space. Multiply the length times the width and this will give you the square footage. You should be able to get decent results with 30-50 actual watts of power per square foot.

2.For larger areas should I go with a single large panel or multiple medium to small lights?

Using multiple lights allows you to better distribute the intense light in more areas of the grow space instead of having all of the higher intensity light concentrated in only one area while the outer edges never receive intense light.

3.Recommended Hanging Distance Above Plants

Seedling: 24” Germination: 24”-30” Veg: 18”-24” Flower: 12”-18”

4.Here are more tips for grow under our light:

Growth stage, turn Growth switch on. Bloom stage, turn Growth and Bloom switches on.

5.Recommended Lighting Time

Veg: 18/6(on/off) or 20/4(on/off) Flower: 12/12(on/off)

6.Recommended Growing Conditions

The rate of photosynthesis and transpiration are directly affected by temperature, humidity and airflow.

The perfect temperature and humidity for your plants are found between 75°-85°F and 50% – 70% humidity, with plenty of airflow to replenish CO2. PH is 6-6.5. You may add more calcium and magnesium than normally needed.

7.Please Note

The light is not water-proof, so do not use it under water environment.

Light may be too strong, please wear your sunglasses when looking at it.

Some leds seem dim. They are IR. Human eye can not see IR very clearly, but you can wear sunglasses to check.

8. Extreme care when handling sharp object in or around the tent

9. Assemble correctly to avoid tent tipping over and causing injury

10. Do not hang equipment on or from grow tent that may collect water


Mars Hydro